THERMAL INSULATION - Thermal insulation system of stomixTHERM

The external thermal insulation composite system with insulation boards made of foam polystyrene is used for wooden constructions and assembled houses. In addition to increase the thermal resistance, it enables to create on the above-mentioned constructions the surface treatment of the facade without gaps. Due to the high variability of the construction methods of wooden constructions and assembled houses, it is necessary to pay close attention to the design of the thermal insulation system. Our service technicians will help to design the optimal composition of the system for your house.

• a

  Base

  clean, without dust and grease, firm coherent and plain (e.g. cement chip or wooden chip)
  

• b

  Penetration of base

  HC-4 base paint (variety and necessity of penetration depends on basis condition)
  HC-4 Base paint
  

• c

  Foundation lath

  for foundation of the lower line of insulation boards, creates a footing edge
  

• d

  Adhesive cements

  AlfaFIX® S11 or AlfaFIX® TIS according to the base and conditions
  AlfaFIX S11 white
  AlfaFIX S11 grey
  AlfaFIX TIS
  

• e

  Insulation boards

  polystyrene EPS 70 F
  

• f

  Anchoring

  SBH-T dowel plate or TIT dowel plate with suitable stud
  

• g

  Base layer

  AlfaFIX® S1 levelling substance, AlfaFIX® S11 or AlfaFIX® TIS and VT1 glass mesh
  AlfaFIX S1 white
  AlfaFIX S1 grey
  AlfaFIX S11 white
  AlfaFIX S11 grey
  AlfaFIX TIS
  

• h

  Strengthening of reinforcing

  corners, sides or parts of ETICS double mesh or bar
  

• i

  Penetration

  HC-4 base paint or HC-5 according to the render
  HC-4 Base paint
  

• j

  Surface treatment

  BetaDEKOR® AD / AF, VF / VD or SIF / SID, AlfaDEKOR local mosaic renders
  AlfaDEKOR F
  AlfaDEKOR G
  AlfaDEKOR S
  BetaDEKOR AD
  BetaDEKOR AF
  BetaDEKOR SID
  BetaDEKOR SIF
  BetaDEKOR VD
  BetaDEKOR VF
  

REASONS FOR THERMAL INSULATION
Most peripheral shells of residential buildings have signifi cantly worse thermal insulating parameters than that required in existing technical standards. Permanently increasing energy prices represent an important living item within the budget and the repeating change in the weather shows the probability of frequent occurrences of extreme temperature variation.

ADVANTAGES OF EXTERNAL THERMAL INSULATION SYSTEMS
• shift of the freezing point from the masonry to the insulation layer
• prevention of damage to masonry due to the infl uence of frost
• prolongation of the service life of the whole construction
• improvement of the accumulation of masonry
• signifi cant savings on heating costs
• lower demands for heating sources
• better protection against heat during high summer temperatures
• restriction of the origination of moulds
• new design due to the selected surface treatment
• evaluations of the building for possible sale or rent

THERMAL INSULATION SYSTEMS OF THE CZECH COMPANY STOMIX
INTEGRITY OF THE SYSTEM
The external thermal insulation systems introduced onto the EU market has precisely stated variants of the composition which are given by the producer of the respective thermal insulation system. During the application, it is not allowed to combine other than the recommended components. In accordance with these regulations, STOMIX offers compact system, including thermal insulation, dowels, glues and other products whose properties are mutually compatible.

LARGE VARIABILITY
The system can be adapted according to the type of building, the request of the investor and local conditions. It is possible to apply it on family houses and panel houses, as well as assembled or wooden houses. During the construction of new house we recommend to take into consideration the high-quality thermal insulation within the basic project.

FREE ASSISTANCE DURING IMPLEMENTATION

Experience shows that one of the largest problems during the application of thermal insulation is unprofessional implementation or even the use of other than the recommended components. To be certain of the faultless functionality of our thermal-insulation systems, we provide clients with a series of free services. That means professional consulting services, the tailor-made project of suitable thermal insulation and technological supervision during application, as well as training of construction companies or assistance during the organisation of the comprehensive revitalization.

CERTIFICATION

• the fi rst Czech holder of European Technical Approvals for thermal-insulation systems allows us to use the marking

• Quality Management Certifi cate in accordance with ISO 9001

• Environmental Management System Certificate according to ISO 14001

• the management system of energies is monitored according to the standard BS EN 16001

•  product certifi cation in the European Union and the Czech Republic, Slovak Republic, Lithuania, Poland, Great Britain, Russia and Ukraine.

WORLD OF STOMIX

YOU CAN FIND CONTACT INFORMATION BY CHOOSING FROM THE MENU:

CERTIFICATION