THERMAL INSULATION - stomix THERM alfa

The insulation system on the basis of polystyrene insulation boards represents the most widespread solution for thermal insulation in the Czech Republic and in whole Europe as well. The system is recommended for all people that are looking for high-quality thermal insulation at an acceptable price. The increased thermal resistance leads to an immediate signifi cant reduction in costs and the investment return into thermal insulation is very fast. Some of the advantages of the system are the low loading of the construction of the building and the relatively low demanding application of the thermal insulation.

• a

  Base

  clean, without dust and grease, fi rm coherent and plain (e.g. concrete, porous concrete or bricked masonry)
  

• b

  Penetration of base

  EH penetration varnish or HC-4 base paint (variety and necessity of penetration depends on basis condition)
  Penetrating varnish EH
  HC-4 Base paint
  

• c

  Adhesive cements

  AlfaFIX® S1, AlfaFIX® S2 or AlfaFIX® S11 according to the base and conditions
  AlfaFIX S1 white
  AlfaFIX S1 grey
  AlfaFIX S11 white
  AlfaFIX S11 grey
  AlfaFIX S2
  

• d

  Insulation boards

  polystyrene EPS 70 F
  

• e

  Anchoring

  disc dowels PTH, PTH-L, PTH-KZ, PTH-KZL, NTK U, NT U, STR U, only additional TID-T, TID-TL
  

• f

  Foundation lath

  for foundation of the lower line of insulation boards, creates a footing edge
  

• g

  Strengthening of reinforcing

  corners, sides or parts of ETICS double mesh or bar
  

• h

  Base layer

  AlfaFIX® S1 levelling substance and VT1 glass mesh
  AlfaFIX S1 white
  AlfaFIX S1 grey
  

• i

  Penetration

  EH penetration varnish, HC-4 base paint or HC-5 according to the type of render
  Penetrating varnish EH
  HC-4 Base paint
  

• j

  Surface treatment

  BetaDEKOR® AD / AF, SIF / SID, VF / VD or BetaDEKOR® SF / SD eventually with GamaDEKOR® SA, SIL paint
  GamaDEKOR SA
  GamaDEKOR SIL
  BetaDEKOR AD
  BetaDEKOR AF
  BetaDEKOR SD
  BetaDEKOR SF
  BetaDEKOR SID
  BetaDEKOR SIF
  BetaDEKOR VD
  BetaDEKOR VF
  

• k

  Window

REASONS FOR THERMAL INSULATION
Most peripheral shells of residential buildings have signifi cantly worse thermal insulating parameters than that required in existing technical standards. Permanently increasing energy prices represent an important living item within the budget and the repeating change in the weather shows the probability of frequent occurrences of extreme temperature variation.

ADVANTAGES OF EXTERNAL THERMAL INSULATION SYSTEMS
• shift of the freezing point from the masonry to the insulation layer
• prevention of damage to masonry due to the infl uence of frost
• prolongation of the service life of the whole construction
• improvement of the accumulation of masonry
• signifi cant savings on heating costs
• lower demands for heating sources
• better protection against heat during high summer temperatures
• restriction of the origination of moulds
• new design due to the selected surface treatment
• evaluations of the building for possible sale or rent

THERMAL INSULATION SYSTEMS OF THE CZECH COMPANY STOMIX
INTEGRITY OF THE SYSTEM
The external thermal insulation systems introduced onto the EU market has precisely stated variants of the composition which are given by the producer of the respective thermal insulation system. During the application, it is not allowed to combine other than the recommended components. In accordance with these regulations, STOMIX offers compact system, including thermal insulation, dowels, glues and other products whose properties are mutually compatible.

LARGE VARIABILITY
The system can be adapted according to the type of building, the request of the investor and local conditions. It is possible to apply it on family houses and panel houses, as well as assembled or wooden houses. During the construction of new house we recommend to take into consideration the high-quality thermal insulation within the basic project.

FREE ASSISTANCE DURING IMPLEMENTATION

Experience shows that one of the largest problems during the application of thermal insulation is unprofessional implementation or even the use of other than the recommended components. To be certain of the faultless functionality of our thermal-insulation systems, we provide clients with a series of free services. That means professional consulting services, the tailor-made project of suitable thermal insulation and technological supervision during application, as well as training of construction companies or assistance during the organisation of the comprehensive revitalization.

CERTIFICATION

• the fi rst Czech holder of European Technical Approvals for thermal-insulation systems allows us to use the marking

• Quality Management Certifi cate in accordance with ISO 9001

• Environmental Management System Certificate according to ISO 14001

• the management system of energies is monitored according to the standard BS EN 16001

•  product certifi cation in the European Union and the Czech Republic, Slovak Republic, Lithuania, Poland, Great Britain, Russia and Ukraine.

WORLD OF STOMIX

YOU CAN FIND CONTACT INFORMATION BY CHOOSING FROM THE MENU:

CERTIFICATION